|
Last Modified: 11-29-2007 |
1.6 U |
|
Service Category: Vehicle Exterior |
Section: Lighting (ext) |
|
Model Year: 2008 |
Model: Sequoia |
Doc ID: RM000002WL5006X |
|
Title: LIGHTING (EXT): LIGHTING SYSTEM: DATA LIST / ACTIVE TEST (2008 Sequoia) |
DATA LIST / ACTIVE TEST
1. DATA LIST
HINT:
Using the Techstream to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Main Body / (desired system) / Data List.
(e) According to the display on the Techstream, read the Data List.
Main Body
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
D Door Courtesy SW
|
Front door courtesy light switch LH signal / ON or OFF
|
ON: Front door courtesy light switch LH ON
OFF: Front door courtesy light switch LH OFF
|
-
|
|
P Door Courtesy SW
|
Front door courtesy light switch RH signal / ON or OFF
|
ON: Front door courtesy light switch RH ON
OFF: Front door courtesy light switch RH OFF
|
-
|
|
Dimmer SW
|
Dimmer switch signal / ON or OFF
|
ON: Dimmer switch ON
OFF: Dimmer switch OFF
|
-
|
|
Passing Light SW
|
Passing light switch signal / ON or OFF
|
ON: Passing light switch ON
OFF: Passing light switch OFF
|
-
|
|
Front Fog Light SW
|
Front fog light switch signal / ON or OFF
|
ON: Front fog light switch ON
OFF: Front fog light switch OFF
|
-
|
|
Auto Light SW
|
Auto light switch signal / ON or OFF
|
ON: Auto light switch ON
OFF: Auto light switch OFF
|
-
|
|
Head Light SW (Head)
|
Headlight switch signal / ON or OFF
|
ON: Headlight switch ON
OFF: Headlight switch OFF
|
-
|
|
Head Light SW (Tail)
|
Taillight switch signal / ON or OFF
|
ON: Taillight switch ON
OFF: Taillight switch OFF
|
-
|
|
Illumination Rate
|
Illumination rate / min.: 0, max.: 99.99
|
Actual illumination rate is displayed
|
-
|
|
Parking Brake SW
|
Parking brake switch signal / ON or OFF
|
ON: Parking brake switch ON
OFF: Parking brake switch OFF
|
-
|
|
Light Auto OFF Delay
|
Light auto off delay time / OFF, 30s, 60s, 90s
|
Customize setting displayed
|
-
|
|
Sensitivity
|
Turn on luminous intensity/ Dark1, Dark2, Normal, Light1, Light2
|
Customize setting displayed
|
-
|
Mirror ECU
|
Tester Display
|
Measurement Item/Range
|
Normal Condition
|
Diagnostic Note
|
|
Foot Light
|
Foot light lighting time / OFF, 7.5s, 15s, 30s
|
Customize setting displayed
|
-
|
2. ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Main Body / (desired system) / Active Test.
(e) According to the display on the Techstream, perform the Active Test.
Main Body
|
Tester Display
|
Test Part
|
Control Range
|
Diagnostic Note
|
|
Taillight Relay
|
Taillight
|
ON or OFF
|
-
|
|
Headlight Relay
|
Headlight
|
ON or OFF
|
-
|
|
Head Light Hi
|
Headlight (High)
|
ON or OFF
|
-
|
|
Front Fog Light Relay
|
Front fog light
|
ON or OFF
|
-
|
Mirror ECU
|
Tester Display
|
Test Part
|
Control Range
|
Diagnostic Note
|
|
Foot Light
|
Foot light (puddle light)
|
ON or OFF
|
-
|
|